Sprout 3-Drawer Changer Dresser: Safe Assembly and Setup

Before you start: what the Sprout includes and what you need to supply

The Sprout 3-Drawer Changer Dresser from Babyletto arrives with pre-installed ball-bearing drawer glides, an anti-tip kit, and a removable changing tray. The tray is designed to fit a 31" x 16" changing pad, which is not included, so have one ready before you set up the changing station. The dresser itself is constructed with a sustainably sourced New Zealand pine base and TSCA-compliant engineered wood for the drawer fronts and frame, finished with a non-toxic, multi-step paint process that is lead- and phthalate-safe. Assembly is required; the supplied information does not include step-by-step build instructions, so follow the manufacturer's assembly guide for the physical build and use this article to plan the safety-critical steps around it.

Assembly and safety checkpoints, in order

Work through these checkpoints once the basic frame is built according to the manufacturer's instructions. Each step reflects a supplied product detail or limit.

1. 1. Build in the nursery and leave room to work: Assemble the dresser in the room where it will live, if possible. The assembled footprint is 41.5 x 20.25 x 36.25 inches (L x W x H), so clear that floor space plus working room before you begin. The shipping carton is 45.5" x 25" x 12.7" and weighs 97 lbs, so plan a clear path for delivery and unpacking.
2. 2. Install the anti-tip kit before loading the drawers: The Sprout includes an anti-tip kit, and the dresser is designed to prevent tip-over hazards, tested above required and voluntary standards for furniture (ASTM F2057). Attach the dresser to the wall using the included hardware before you fill the drawers or add the changing tray. This is the single most important safety step in the setup.
3. 3. Check the drawer stop mechanisms: Drawers come with pre-installed, smooth and quiet ball-bearing glides and stop mechanisms designed to prevent them from pulling out. After assembly, pull each drawer out fully to confirm the stop engages and the drawer does not come free.
4. 4. Fit the changing tray and pad: The removable changing tray fits a 31" x 16" pad (not included). Place the pad on the tray and confirm it sits flat and does not slide. The tray is rated for a maximum of 30 lbs. When your baby outgrows the changing stage, the tray can be removed and the piece used as a standard three-drawer dresser.
5. 5. Confirm the dresser is stable and square: With the anti-tip kit attached and the dresser empty, check that it sits level on the floor and does not rock. The supplied information does not include leveling instructions, so if the floor is uneven, address that before loading the drawers.

Sprout 3-Drawer Changer Dresser: key setup facts

• Sprout 3-Drawer Changer Dresser: Assembled dimensions: 41.5 x 20.25 x 36.25 inches (L x W x H). Confirms the floor space and clearance you need before assembly and placement.

  

• Sprout 3-Drawer Changer Dresser: Changing tray fits a 31" x 16" pad (not included) and supports a maximum of 30 lbs. Tells you which pad to buy and when to stop using the changing function.
• Sprout 3-Drawer Changer Dresser: Anti-tip kit included; dresser tested above required and voluntary furniture tip-over standards (ASTM F2057). Explains why wall attachment is part of the intended setup, not an optional extra.
• Sprout 3-Drawer Changer Dresser: Ships via UPS Ground, no signature required; not available to ship to HI, AK, or Canada; not eligible for exchanges. Affects delivery planning and your options if the order is not what you expected.

Where the changing tray fits into your routine, and when to remove it

The Sprout is designed as a dresser and changing table in one, and the changing tray is removable. Keep the tray on only while your baby is within the 30 lb limit and still using the changing surface. Once the changing stage ends, remove the tray and the piece transitions to a standard three-drawer dresser for a big-kid room. The supplied information notes that the tray is not necessary for the dresser's function, so removing it does not compromise the furniture. Pair the dresser with the Sprout 4-in-1 Convertible Crib if you want a matched set, though the supplied information does not describe any physical attachment between the two.

Care and everyday checks after assembly

• Cleaning: Wash with warm water and mild soap, then wipe dry after washing. Avoid harsh cleaners that could affect the finish.
• Drawer glide check: Periodically confirm the stop mechanisms still engage and the glides run smoothly. Pre-installed ball-bearing glides should not need lubrication based on the supplied information.
• Anti-tip hardware check: Re-check the wall attachment periodically, especially after moving the dresser or rearranging the room. The supplied information does not specify a re-check interval, so use your judgment and check after any move.
• Weight limit: Keep the changing tray loaded to no more than 30 lbs. The supplied information does not state a weight limit for the drawers, so avoid overloading them.

What the supplied information does not cover

The supplied record does not include a step-by-step assembly manual, a list of tools required, or an estimated build time. It also does not state a drawer weight capacity or a specific cleaning interval. For those details, refer to the manufacturer's assembly instructions and warranty documentation. The dresser carries a 12-month manufacturer warranty provided by Babyletto, which is worth keeping with your purchase records. If you need to return or exchange the item, note that it is not eligible for exchanges, so confirm your color choice before ordering; the available finishes are Washed Natural / White, White, Chestnut / Natural, Natural Walnut, and Honey.